How does a Ignite-UX Cold Install looks like
From Wiki-UX.info
Contents
Ignite-UX Welcome Screen
¨
Welcome to Ignite-UX!
Use the <tab> key to navigate between fields, and the arrow keys
within fields. Use the <return/enter> key to select an item.
Use the <return/enter> or <space-bar> to pop-up a choices list. If the
menus are not clear, select the "Help" item for more information.
Hardware Summary: System Model: 9000/785/C8000
+----------------------+---------------+--------------------+[ Scan Again ]
| Disks: 1 ( 68.4GB)| Floppies: 0 | LAN cards: 1 |
| CD/DVDs: 1 | Tapes: 0 | Memory: 2046Mb |
| Graphics Ports: 0 | IO Buses: 9 | CPUs: 4 |[ H/W Details ]
+----------------------+---------------+--------------------+
[ Install HP-UX ]
[ Run an Expert Recovery Shell ]
[ Advanced Options ]
[ Reboot ] [ Help ]
Ignite-UX Source and Interface Options
¨
User Interface and Media Options
This screen lets you pick from options that will determine if an
Ignite-UX server is used, and your user interface preference.
Source Location Options:
[ * ] Media only installation
[ ] Media with Network enabled (allows use of SD depots)
[ ] Ignite-UX server based installation
User Interface Options:
[ ] Guided Installation (recommended for basic installs)
[ * ] Advanced Installation (recommended for disk and filesystem management)
[ ] No user interface - use all the defaults and go
Hint: If you need to make LVM size changes, or want to set the
final networking parameters during the install, you will
need to use the Advanced mode (or remote graphical interface).
[ OK ] [ Cancel ] [ Help ]
Ignite-UX Advaced Installation
¨
/opt/ignite/bin/itool ()
/-------\/----------\/--------\/-------------\/----------\
| Basic || Software || System || File System || Advanced |
| \-------------------------------------------------------------------\
| |
| Configurations: [ HP-UX B.11.11 Default ->] [ Description... ] |
| |
| Environments: [ B.11.11_archive.gz (B.11.1 ->] (HP-UX B.11.11) |
| |
| [ Root Disk ] HP_73.4GMAX3073NP, 0/2/1/0.6.0, 70007 MB |
| |
| File System: [ Logical Volume Manager (LVM) with VxFS ->] |
| |
| [ Root Swap (MB)... ] 4096 Physical Memory (RAM) = 2046 MB |
| |
| [ Languages... ] English [ Keyboards... ] [ Additional... ]|
| |
\---------------------------------------------------------------------------/
[ Show Summary... ] [ Reset Configuration ]
------------------------------------------------------------------------------
[ Go! ] [ Cancel ] [ Help ]
Ignite-UX Advaced Installation Filesystem tab
¨
/opt/ignite/bin/itool ()
/-------\/----------\/--------\/-------------\/----------\
| Basic || Software || System || File System || Advanced |
/------------------------------/ \------------------------------\
| Mount Dir Usage Size(MB) % Used Group S |
| /---------------------------------------------------\ |
| | /tmp VxFS 512 0 vg00 F ^ [ Add ] |
| | /usr VxFS 6192 19 vg00 F | [ Modify ] |
| | /var VxFS 6192 12 vg00 F v [ Remove ] |
| \< ----------->/ |
| |
| Usage: [ VxFS ->] Group: [ vg00 ->] Mount Dir: /tmp |
| |
| Size: [ Fixed MB ->] 512 Avail: 45952 MB |
| |
| [ Add/Remove Disks ] [ ---- Additional Tasks ---- ->] |
| |
\---------------------------------------------------------------------------/
[ Show Summary... ] [ Reset Configuration ]
------------------------------------------------------------------------------
[ Go! ] [ Cancel ] [ Help ]
Ignite-UX Go Confirmation scree
¨
itool Confirmation
All data will be destroyed on the following disks:
Addr Disk Size(MB) Description
/--------------------------------------------------------------\
| 0/2/1/0.6.0 70007 MB HP_73.4GMAX3073NP ^
| |
| v
\--------------------------------------------------------------/
The results of the preinstall analysis are:
/--------------------------------------------------------------\
| WARNING: The disk at: 0/2/1/0.6.0 (HP_73.4GMAX3073NP) ^
| appears to contain a file system and boot area. Continuing
| the installation will destroy any existing data on this
| disk.
|
| v
\--------------------------------------------------------------/
----------------------------------------------------------------------------
[ Go! ] [ < Back ] [ Help ]
Ignite-UX Ignition
Step 1 - LVM / Mini-system / Bundle / Archive installation
* Loading configuration utility...
* Beginning installation from source: /dev/dsk/c4t0d0
======= 05/02/08 15:52:56 EDT Starting system configuration...
* Configure_Disks: Begin
* Will install B.11.11 onto this system.
* Creating LVM physical volume "/dev/rdsk/c2t6d0" (0/2/1/0.6.0).
* Creating volume group "vg00".
* Creating logical volume "vg00/lvol1" (/stand).
* Creating logical volume "vg00/lvol2" (swap_dump).
* Creating logical volume "vg00/lvol3" (/).
* Creating logical volume "vg00/lvol4" (/opt).
* Creating logical volume "vg00/lvol5" (/tmp).
* Creating logical volume "vg00/lvol6" (/usr).
* Creating logical volume "vg00/lvol7" (/var).
* Creating logical volume "vg00/lvol8" (/home).
* Extending logical volume "vg00/lvol1" (/stand).
* Extending logical volume "vg00/lvol2" (swap_dump).
* Extending logical volume "vg00/lvol3" (/).
* Extending logical volume "vg00/lvol4" (/opt).
* Extending logical volume "vg00/lvol5" (/tmp).
* Extending logical volume "vg00/lvol6" (/usr).
* Extending logical volume "vg00/lvol7" (/var).
* Extending logical volume "vg00/lvol8" (/home).
* Making HFS filesystem for "/stand", (/dev/vg00/rlvol1).
* Making VxFS filesystem for "/", (/dev/vg00/rlvol3).
* Making VxFS filesystem for "/opt", (/dev/vg00/rlvol4).
* Making VxFS filesystem for "/tmp", (/dev/vg00/rlvol5).
* Making VxFS filesystem for "/usr", (/dev/vg00/rlvol6).
* Making VxFS filesystem for "/var", (/dev/vg00/rlvol7).
* Making VxFS filesystem for "/home", (/dev/vg00/rlvol8).
* Configure_Disks: Complete
* Download_mini-system: Begin
x ./sbin/fs/hfs/mkfs, 290816 bytes, 568 tape blocks
x ./sbin/fs/hfs/newfs, 212992 bytes, 416 tape blocks
x ./sbin/fs/vxfs/mkfs, 393216 bytes, 768 tape blocks
x ./sbin/fs/vxfs/newfs, 327680 bytes, 640 tape blocks
x ./sbin/mkfs symbolic link to /sbin/fs_wrapper
x ./sbin/newfs symbolic link to /sbin/fs_wrapper
x ./sbin/lib/mfsconfig.d/hfs, 978 bytes, 2 tape blocks
x ./sbin/lib/mfsconfig.d/vxfs, 966 bytes, 2 tape blocks
x ./sbin/fs_wrapper, 233472 bytes, 456 tape blocks
x ./sbin/sh, 401408 bytes, 784 tape blocks
x ./usr/sbin/tunefs, 20480 bytes, 40 tape blocks
x ./sbin/extendfs symbolic link to /sbin/fs_wrapper
x ./sbin/fs/vxfs/extendfs, 319488 bytes, 624 tape blocks
x ./sbin/fs/hfs/extendfs, 245760 bytes, 480 tape blocks
x ./sbin/lvchange, 831488 bytes, 1624 tape blocks
./sbin/lvcreate linked to ./sbin/lvchange
./sbin/lvdisplay linked to ./sbin/lvchange
./sbin/lvextend linked to ./sbin/lvchange
./sbin/lvlnboot linked to ./sbin/lvchange
./sbin/lvreduce linked to ./sbin/lvchange
./sbin/lvremove linked to ./sbin/lvchange
./sbin/lvrmboot linked to ./sbin/lvchange
./sbin/pvchange linked to ./sbin/lvchange
./sbin/pvcreate linked to ./sbin/lvchange
./sbin/pvdisplay linked to ./sbin/lvchange
./sbin/pvmove linked to ./sbin/lvchange
./sbin/vgcfgbackup linked to ./sbin/lvchange
./sbin/vgcfgrestore linked to ./sbin/lvchange
./sbin/vgchange linked to ./sbin/lvchange
./sbin/vgcreate linked to ./sbin/lvchange
./sbin/vgdisplay linked to ./sbin/lvchange
./sbin/vgexport linked to ./sbin/lvchange
./sbin/vgextend linked to ./sbin/lvchange
./sbin/vgimport linked to ./sbin/lvchange
./sbin/vgreduce linked to ./sbin/lvchange
./sbin/vgremove linked to ./sbin/lvchange
./sbin/vgscan linked to ./sbin/lvchange
./sbin/pvck linked to ./sbin/lvchange
x ./usr/bin/lifcp, 36864 bytes, 72 tape blocks
x ./usr/bin/lifls, 24576 bytes, 48 tape blocks
x ./usr/bin/lifrm, 20480 bytes, 40 tape blocks
x ./usr/bin/basename, 12288 bytes, 24 tape blocks
x ./usr/bin/chgrp, 20480 bytes, 40 tape blocks
x ./usr/bin/cmp, 20480 bytes, 40 tape blocks
x ./usr/bin/cp, 28672 bytes, 56 tape blocks
x ./usr/bin/cut, 20480 bytes, 40 tape blocks
x ./usr/bin/dd, 24576 bytes, 48 tape blocks
x ./usr/bin/dirname, 12288 bytes, 24 tape blocks
x ./usr/bin/egrep, 24576 bytes, 48 tape blocks
x ./usr/bin/expr, 20480 bytes, 40 tape blocks
x ./usr/bin/false, 12288 bytes, 24 tape blocks
./usr/bin/fgrep linked to ./usr/bin/egrep
x ./usr/bin/getopts, 163 bytes, 1 tape blocks
./usr/bin/grep linked to ./usr/bin/egrep
x ./usr/bin/hostname, 12288 bytes, 24 tape blocks
x ./usr/bin/kill, 16384 bytes, 32 tape blocks
x ./usr/bin/ln, 16384 bytes, 32 tape blocks
x ./usr/bin/model, 24576 bytes, 48 tape blocks
x ./usr/bin/ps, 36864 bytes, 72 tape blocks
x ./usr/bin/pwd, 12288 bytes, 24 tape blocks
x ./usr/bin/rm, 28672 bytes, 56 tape blocks
./usr/bin/rmdir linked to ./usr/bin/rm
x ./usr/bin/sed, 40960 bytes, 80 tape blocks
x ./usr/bin/sort, 40960 bytes, 80 tape blocks
x ./usr/bin/tar, 45056 bytes, 88 tape blocks
x ./usr/bin/touch, 16384 bytes, 32 tape blocks
x ./usr/bin/true, 12288 bytes, 24 tape blocks
x ./usr/bin/uname, 16384 bytes, 32 tape blocks
x ./usr/bin/wc, 16384 bytes, 32 tape blocks
x ./usr/bin/compress, 28672 bytes, 56 tape blocks
x ./usr/bin/ed, 57344 bytes, 112 tape blocks
x ./usr/bin/find, 57344 bytes, 112 tape blocks
x ./usr/bin/getopt, 12288 bytes, 24 tape blocks
x ./usr/bin/id, 16384 bytes, 32 tape blocks
x ./usr/bin/more, 65536 bytes, 128 tape blocks
x ./usr/bin/tail, 20480 bytes, 40 tape blocks
./usr/bin/uncompress linked to ./usr/bin/compress
./usr/bin/zcat linked to ./usr/bin/compress
x ./usr/bin/bdf, 20480 bytes, 40 tape blocks
x ./usr/bin/diff, 36864 bytes, 72 tape blocks
x ./usr/bin/mt, 16384 bytes, 32 tape blocks
x ./usr/bin/ftp, 114688 bytes, 224 tape blocks
x ./usr/bin/rcp, 45056 bytes, 88 tape blocks
x ./usr/bin/remsh, 28672 bytes, 56 tape blocks
x ./usr/bin/ex, 241664 bytes, 472 tape blocks
./usr/bin/vi linked to ./usr/bin/ex
x ./usr/lib/uxbootlf, 707584 bytes, 1382 tape blocks
x ./usr/lib/libHcurses.sl symbolic link to /usr/lib/libcurses.1
x ./usr/lib/libM.1 symbolic link to ./libm.1
x ./usr/lib/libc.1, 1515520 bytes, 2960 tape blocks
x ./usr/lib/libc.2, 1359872 bytes, 2656 tape blocks
x ./usr/lib/libcl.2, 987136 bytes, 1928 tape blocks
x ./usr/lib/libcurses.1, 155648 bytes, 304 tape blocks
x ./usr/lib/libdld.1, 12288 bytes, 24 tape blocks
x ./usr/lib/libdld.2, 20480 bytes, 40 tape blocks
x ./usr/lib/libdld.sl symbolic link to ./libdld.2
x ./usr/lib/libfab.1, 20480 bytes, 40 tape blocks
x ./usr/lib/libfab.sl symbolic link to ./libfab.1
x ./usr/lib/libm.1, 98773 bytes, 193 tape blocks
x ./usr/lib/libm.2, 184320 bytes, 360 tape blocks
x ./usr/lib/libm.sl symbolic link to ./libm.2
x ./usr/lib/libnss_files.1, 36864 bytes, 72 tape blocks
x ./usr/lib/libpthread.1, 106496 bytes, 208 tape blocks
x ./usr/lib/libsec.2, 114688 bytes, 224 tape blocks
x ./usr/lib/libstd_v2.2, 1511424 bytes, 2952 tape blocks
x ./usr/lib/libxcurses.1, 315392 bytes, 616 tape blocks
x ./usr/lib/nls/msg/C/dcerpc.cat, 13755 bytes, 27 tape blocks
x ./usr/lib/nls/msg/C/cpp.cat, 10542 bytes, 21 tape blocks
x ./usr/lib/libnsl.1, 602112 bytes, 1176 tape blocks
x ./usr/lib/libnsl.sl symbolic link to /usr/lib/libnsl.1
x ./usr/lib/libnss_dns.1, 20480 bytes, 40 tape blocks
x ./usr/lib/libxti.2, 110592 bytes, 216 tape blocks
x ./usr/lib/sw/ui/C/smc_addhost.ui, 2571 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_analyze.ui, 4663 bytes, 10 tape blocks
x ./usr/lib/sw/ui/C/smc_bundles.ui, 1775 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_chgloc.ui, 3634 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_defs.h, 24742 bytes, 49 tape blocks
x ./usr/lib/sw/ui/C/smc_depend.ui, 2824 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_details.ui, 3990 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_dsa.ui, 8100 bytes, 16 tape blocks
x ./usr/lib/sw/ui/C/smc_init.ui, 708 bytes, 2 tape blocks
x ./usr/lib/sw/ui/C/smc_install.ui, 4018 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_jobopts.ui, 113847 bytes, 223 tape blocks
x ./usr/lib/sw/ui/C/smc_jobs.ui, 20222 bytes, 40 tape blocks
x ./usr/lib/sw/ui/C/smc_list.ui, 1962 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_menudefs.h, 1792 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_options.ui, 5889 bytes, 12 tape blocks
x ./usr/lib/sw/ui/C/smc_patch.ui, 2527 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_remove.ui, 3289 bytes, 7 tape blocks
x ./usr/lib/sw/ui/C/smc_rmsourc.ui, 2411 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_sched.ui, 4591 bytes, 9 tape blocks
x ./usr/lib/sw/ui/C/smc_selalt.ui, 2804 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_seldpt.ui, 2404 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_session.ui, 2180 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_softinf.ui, 5653 bytes, 12 tape blocks
x ./usr/lib/sw/ui/C/smc_softwar.ui, 18847 bytes, 37 tape blocks
x ./usr/lib/sw/ui/C/smc_source.ui, 4902 bytes, 10 tape blocks
x ./usr/lib/sw/ui/C/smc_targets.ui, 12190 bytes, 24 tape blocks
x ./usr/lib/sw/ui/C/smc_task.ui, 5805 bytes, 12 tape blocks
x ./usr/lib/sw/help/C/sduhelp.hv, 28436 bytes, 56 tape blocks
x ./usr/lib/sw/help/C/sduhelp.hvk, 5145 bytes, 11 tape blocks
x ./usr/lib/sw/help/C/sduhelp00.ht, 215428 bytes, 421 tape blocks
x ./usr/lib/sw/help/C/sduhelp01.ht, 14210 bytes, 28 tape blocks
x ./usr/lib/libcma.1, 462848 bytes, 904 tape blocks
x ./usr/lib/libcma.2, 483328 bytes, 944 tape blocks
x ./usr/lib/libcma.sl symbolic link to ./libcma.2
x ./usr/lib/libd4r.1, 45056 bytes, 88 tape blocks
x ./usr/lib/libd4r.sl symbolic link to ./libd4r.1
x ./usr/lib/libdce.1, 4235264 bytes, 8272 tape blocks
x ./usr/lib/libdce.2, 4292608 bytes, 8384 tape blocks
x ./usr/lib/libdce.sl symbolic link to ./libdce.2
x ./usr/lib/libdcekt.1, 4427776 bytes, 8648 tape blocks
x ./usr/lib/libsis.sl, 1044480 bytes, 2040 tape blocks
x ./usr/lib/dld.sl, 155648 bytes, 304 tape blocks
x ./usr/lib/libdc.sl, 45056 bytes, 88 tape blocks
x ./usr/lib/libsmapi.2, 86016 bytes, 168 tape blocks
x ./usr/sbin/devnm, 16384 bytes, 32 tape blocks
x ./usr/sbin/diskinfo, 24576 bytes, 48 tape blocks
x ./usr/sbin/insf symbolic link to /sbin/mksf
x ./usr/sbin/ioinit symbolic link to /sbin/ioinit
x ./usr/sbin/ioscan symbolic link to /sbin/ioscan
x ./usr/sbin/mknod symbolic link to /sbin/mknod
x ./usr/sbin/mount symbolic link to /sbin/mount
x ./usr/sbin/reboot symbolic link to /sbin/reboot
x ./usr/sbin/setboot, 20480 bytes, 40 tape blocks
x ./usr/sbin/swapon, 28672 bytes, 56 tape blocks
x ./usr/sbin/umount symbolic link to /sbin/umount
x ./usr/sbin/chroot, 12288 bytes, 24 tape blocks
x ./usr/sbin/rvxdump symbolic link to /usr/lbin/fs/vxfs/vxdump
x ./usr/sbin/rvxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore
x ./usr/sbin/vxdump symbolic link to /usr/lbin/fs/vxfs/vxdump
x ./usr/sbin/vxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore
x ./usr/sbin/mk_kernel, 27494 bytes, 54 tape blocks
x ./usr/sbin/swagentd, 651264 bytes, 1272 tape blocks
x ./usr/sbin/swacl, 2154496 bytes, 4208 tape blocks
./usr/sbin/swconfig linked to ./usr/sbin/swacl
./usr/sbin/swcopy linked to ./usr/sbin/swacl
./usr/sbin/swinstall linked to ./usr/sbin/swacl
./usr/sbin/swlist linked to ./usr/sbin/swacl
x ./usr/sbin/swmodify, 1257472 bytes, 2456 tape blocks
./usr/sbin/swpackage linked to ./usr/sbin/swmodify
./usr/sbin/swreg linked to ./usr/sbin/swacl
./usr/sbin/swremove linked to ./usr/sbin/swacl
./usr/sbin/swverify linked to ./usr/sbin/swacl
x ./usr/share/lib/terminfo/h/hp, 1448 bytes, 3 tape blocks
x ./usr/share/lib/terminfo/v/vt100, 1358 bytes, 3 tape blocks
x ./usr/share/lib/terminfo/w/wy60, 1673 bytes, 4 tape blocks
x ./usr/conf/gen/templates/generic, 542 bytes, 2 tape blocks
x ./usr/ccs/lbin/cpp, 290816 bytes, 568 tape blocks
x ./usr/lbin/fs/vxfs/vxdump, 110592 bytes, 216 tape blocks
x ./usr/lbin/fs/vxfs/vxrestore, 126976 bytes, 248 tape blocks
x ./usr/lbin/sw/control_utils, 131332 bytes, 257 tape blocks
x ./usr/lbin/swagent, 1536000 bytes, 3000 tape blocks
x ./usr/lbin/sysadm/create_sysfile, 24576 bytes, 48 tape blocks
x ./usr/lbin/sysadm/system_prep, 10000 bytes, 20 tape blocks
x ./usr/obam/lbin/gethelp, 1236992 bytes, 2416 tape blocks
x ./usr/obam/lbin/ui_exec, 12288 bytes, 24 tape blocks
x ./usr/obam/lib/libIDMawrt.1, 1995529 bytes, 3898 tape blocks
x ./usr/obam/lib/libIDMawrt.sl symbolic link to ./libIDMawrt.1
x ./usr/obam/lib/libobam.1, 1032192 bytes, 2016 tape blocks
x ./usr/obam/lib/libobam.sl symbolic link to ./libobam.1
x ./usr/obam/lib/obam_aw.dmb, 149652 bytes, 293 tape blocks
x ./usr/obam/lib/help/C/ui/ui.sdl, 81025 bytes, 159 tape blocks
x ./usr/contrib/bin/gunzip, 90112 bytes, 176 tape blocks
./usr/contrib/bin/gzip linked to ./usr/contrib/bin/gunzip
x ./sbin/awk, 397312 bytes, 776 tape blocks
x ./sbin/cat, 208896 bytes, 408 tape blocks
x ./sbin/chmod, 249856 bytes, 488 tape blocks
x ./sbin/chown, 258048 bytes, 504 tape blocks
x ./sbin/date, 241664 bytes, 472 tape blocks
x ./sbin/frecover, 368640 bytes, 720 tape blocks
x ./sbin/fs/cdfs/mount, 229376 bytes, 448 tape blocks
x ./sbin/fs/cdfs/umount symbolic link to /sbin/fs/hfs/umount
x ./sbin/fs/hfs/fsck, 339968 bytes, 664 tape blocks
x ./sbin/fs/hfs/mount, 229376 bytes, 448 tape blocks
x ./sbin/fs/hfs/umount, 192512 bytes, 376 tape blocks
x ./sbin/fs/vxfs/fsck, 495616 bytes, 968 tape blocks
x ./sbin/fs/vxfs/mount, 458752 bytes, 896 tape blocks
x ./sbin/fs/vxfs/umount symbolic link to /sbin/fs/hfs/umount
x ./sbin/fsck symbolic link to /sbin/fs_wrapper
x ./sbin/init, 299008 bytes, 584 tape blocks
x ./sbin/insf, 405504 bytes, 792 tape blocks
x ./sbin/ioinit, 221184 bytes, 432 tape blocks
x ./sbin/ioscan, 229376 bytes, 448 tape blocks
x ./sbin/ls, 286720 bytes, 560 tape blocks
x ./sbin/mkboot, 274432 bytes, 536 tape blocks
x ./sbin/mkdir, 200704 bytes, 392 tape blocks
x ./sbin/mknod, 192512 bytes, 376 tape blocks
x ./sbin/mount, 274432 bytes, 536 tape blocks
x ./sbin/mv, 241664 bytes, 472 tape blocks
x ./sbin/reboot, 245760 bytes, 480 tape blocks
x ./sbin/stty, 208896 bytes, 408 tape blocks
x ./sbin/umount, 221184 bytes, 432 tape blocks
x ./sbin/restore, 290816 bytes, 568 tape blocks
x ./sbin/pax, 389120 bytes, 760 tape blocks
x ./dev/config, 0 bytes, 0 blocks, character device
x ./dev/null, 0 bytes, 0 blocks, character device
x ./dev/console, 0 bytes, 0 blocks, character device
x ./dev/kmem, 0 bytes, 0 blocks, character device
x ./dev/mem, 0 bytes, 0 blocks, character device
x ./dev/rroot, 0 bytes, 0 blocks, character device
x ./dev/root, 0 bytes, 0 blocks, character device
x ./dev/tty, 0 bytes, 0 blocks, character device
x ./dev/syscon, 0 bytes, 0 blocks, character device
x ./dev/systty, 0 bytes, 0 blocks, character device
x ./tmp/set_locale, 3305 bytes, 7 tape blocks
x ./var/adm/sw/security/_ACL, 40 bytes, 1 tape blocks
x ./var/adm/sw/security/_OWNER, 62 bytes, 1 tape blocks
x ./var/adm/sw/security/_PROD_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/_SOC_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/secrets, 15 bytes, 1 tape blocks
x ./var/adm/sw/defaults, 1383 bytes, 3 tape blocks
x ./var/opt/ignite/local/manifest/template.def, 14388 bytes, 29 tape blocks
x ./opt/ignite/share/man/man1m.Z/print_manifest.1m, 1428 bytes, 3 tape blocks
x ./opt/ignite/binpa/print_manifest, 45056 bytes, 88 tape blocks
x ./opt/ignite/bin symbolic link to /opt/ignite/binpa
x ./etc/group, 184 bytes, 1 tape blocks
x ./etc/passwd, 332 bytes, 1 tape blocks
x ./etc/magic, 8794 bytes, 18 tape blocks
x ./etc/hosts, 486 bytes, 1 tape blocks
x ./etc/services, 10908 bytes, 22 tape blocks
x ./etc/inetsvcs.conf, 15 bytes, 1 tape blocks
x ./etc/nsswitch.conf, 382 bytes, 1 tape blocks
x ./configure3, 1404928 bytes, 2744 tape blocks
x ./monitor_bpr, 81920 bytes, 160 tape blocks
* Download_mini-system: Complete
* Loading_software: Begin
* Installing boot area on disk.
* Enabling swap areas.
* Backing up LVM configuration for "vg00".
* Processing the archive source (B.11.11_archive.gz (B.11.11)).
* Fri May 02 15:53:26 EDT 2008: Starting archive load of the source
(B.11.11_archive.gz (B.11.11)).
* Processed 10% of archive
* Processed 20% of archive
* Processed 30% of archive
* Processed 40% of archive
* Processed 50% of archive
* Processed 60% of archive
* Processed 70% of archive
* Processed 80% of archive
* Processed 90% of archive
* Completed 100% of archive
* Fri May 02 16:00:48 EDT 2008: Completed archive load of the source
(B.11.11_archive.gz (B.11.11)).
* Executing user specified script:
"/opt/ignite/data/scripts/os_arch_post_l".
* Running the ioinit command ("/sbin/ioinit -c")
* Creating device files via the insf command.
insf: Installing special files for sdisk instance 0 address 0/2/1/0.6.0
insf: Installing special files for sdisk instance 1 address 0/3/2/0.0.0.0
insf: Installing special files for pseudo driver dlpi
insf: Installing special files for pseudo driver kepd
insf: Installing special files for pseudo driver framebuf
insf: Installing special files for pseudo driver sad
* Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link
permissions.
* Creating the system file.
Creating your system file in the file /tmp/ign_configure/tstand.system
* Constructing the bootconf file.
* Setting primary boot path to "0/2/1/0.6.0".
* Executing: "/var/adm/sw/products/OS-Core/CORE-KRN/iux_postload".
* Executing: "/var/adm/sw/products/OS-Core/CORE-SHLIBS/iux_postload".
* Running: /var/adm/sw/products/OS-Core/CORE-SHLIBS/postinstall
NOTE: /usr/bin/libc.2 has been replaced with a version specifically
made for PA2.0 computers. The library can be changed back by
executing libcadmin(1m).
* Executing: "/var/adm/sw/products/PHSS_25983/pfiles/iux_postload".
NOTE: tlinstall is searching filesystem - please be patient
NOTE: Successfully completed
* Loading_software: Complete
* Build_Kernel: Begin
* Tuned kernel for large swap space: "maxswapchunks 2048".
* Building a new kernel using the command: "/usr/sbin/mk_kernel -o
/stand/vmunix".
Generating module: krm...
/usr/bin/mkdir -p /stand/build
Compiling /stand/build/conf.c...
Loading the kernel...
Generating kernel symbol table...
* Build_Kernel: Complete
* Boot_From_Client_Disk: Begin
* Rebooting machine as expected.
NOTE: Rebooting system.
Step 2 - IOINIT / Special Device Files installation
Firmware Version 2.13
Duplex Console IO Dependent Code (IODC) revision 1
Firmware Version 2.13
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor Cache Size
Number State Inst Data
--------- -------- --------------------- ----------------- ------------
0 900 MHz Active Functional 32 MB/32 MB
1 900 MHz Idle Functional 32 MB/32 MB
2 900 MHz Idle Functional 32 MB/32 MB
3 900 MHz Idle Functional 32 MB/32 MB
Central Bus Speed (in MHz) : 200
Available Memory : 2097152 KB
Good Memory Required : Not initialized. Defaults to 32 MB.
Primary boot path: scsiA.6
0/2/1/0.6
Alternate boot path: lan.0.0.0.0
0/3/3/0
Console path: 0/4/0/0.0
Current Console path: serial_A.643
17.643
Keyboard path: usb0
0/3/1/0.0
Keyboard path ignored for serial consoles.
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 2
HARD Booted.
ISL Revision A.00.43 Apr 12, 2000
ISL booting hpux
Boot
: disk(0/2/1/0.6.0.0.0.0.0;0)/stand/vmunix
10653696 + 1933312 + 1534832 start 0x1fc568
alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000.
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: nfs3_link(): File system was registered at index 3.
NOTICE: autofs_link(): File system was registered at index 6.
NOTICE: cachefs_link(): File system was registered at index 7.
iether0: INITIALIZING HP PCI 1000Base-T Built-in at hardware path 0/3/3/0
System Console is on the Built-In Serial Interface
Entering cifs_init...
Initialization finished successfully... slot is 9
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Starting the STREAMS daemons-phase 1
Checking root file system.
/dev/root: No such device
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 2095104 Kbytes, lockable: 1564608 Kbytes, available: 1804120 Kbytes
Volume group "/dev/vg00" has been successfully changed.
Resynchronized volume group /dev/vg00
* Running the ioinit command ("/sbin/ioinit -c")
* Creating device files via the insf command.
insf: Installing special files for sctl instance 0 address 0/0/1/0.7.0
insf: Installing special files for sctl instance 1 address 0/0/1/1.7.0
insf: Installing special files for sdisk instance 0 address 0/2/1/0.6.0
insf: Installing special files for sctl instance 2 address 0/2/1/0.7.0
insf: Installing special files for sctl instance 3 address 0/2/1/1.7.0
insf: Installing special files for hub instance 0 address 0/3/1/0.1
insf: Installing special files for hid instance 0 address 0/3/1/0.1.2
insf: Installing special files for hub instance 1 address 0/3/1/1.1
insf: Installing special files for hid instance 1 address 0/3/1/1.1.2
insf: Installing special files for sdisk instance 1 address 0/3/2/0.0.0.0
insf: Installing special files for sctl instance 4 address 0/3/2/0.0.7.0
insf: Installing special files for sctl instance 5 address 0/3/2/0.1.7.0
insf: Installing special files for ipmi instance 0 address 16
insf: Installing special files for asio0 instance 0 address 17
insf: Installing special files for asio0 instance 1 address 18
insf: Installing special files for pseudo driver cn
insf: Installing special files for pseudo driver mm
insf: Installing special files for pseudo driver devkrs
insf: Installing special files for pseudo driver ptym
insf: Installing special files for pseudo driver ptys
insf: Installing special files for pseudo driver ip
insf: Installing special files for pseudo driver arp
insf: Installing special files for pseudo driver rawip
insf: Installing special files for pseudo driver tcp
insf: Installing special files for pseudo driver udp
insf: Installing special files for pseudo driver stcpmap
insf: Installing special files for pseudo driver nuls
insf: Installing special files for pseudo driver netqa
insf: Installing special files for pseudo driver dmem
insf: Installing special files for pseudo driver diag0
insf: Installing special files for pseudo driver telm
insf: Installing special files for pseudo driver tels
insf: Installing special files for pseudo driver tlclts
insf: Installing special files for pseudo driver tlcots
insf: Installing special files for pseudo driver iomem
insf: Installing special files for pseudo driver tlcotsod
insf: Installing special files for pseudo driver dmp
insf: Installing special files for pseudo driver vols
insf: Installing special files for pseudo driver dev_config
insf: Installing special files for pseudo driver strlog
insf: Installing special files for pseudo driver sad
insf: Installing special files for pseudo driver echo
insf: Installing special files for pseudo driver dlpi
insf: Installing special files for pseudo driver ptm
insf: Installing special files for pseudo driver pts
insf: Installing special files for pseudo driver beep
insf: Installing special files for pseudo driver diag1
insf: Installing special files for pseudo driver klog
insf: Installing special files for pseudo driver sy
insf: Installing special files for pseudo driver kepd
insf: Installing special files for pseudo driver diag2
insf: Installing special files for pseudo driver root
* Boot_From_Client_Disk: Complete
* Run_SD_Configure_Scripts: Begin
* Run_SD_Configure_Scripts: Complete
* Run_Postconfigure_Scripts: Begin
* Applying the networking information.
* Creating the manifest.
* Run all specified post-configure scripts.
* Executing:
"/var/adm/sw/products/EMS-KRMonitor/KRMON-RUN/iux_postconfig".
* Executing user specified script:
"/opt/ignite/data/scripts/os_arch_post_c".
* Run_Postconfigure_Scripts: Complete
======= 05/02/08 16:05:21 EDT Installation complete: Successful
####### # #
# # # #
# # # #
# # ###
# # # #
# # # #
####### # #
NOTE: Rebooting system.
sync'ing disks (0 buffers to flush):
0 buffers not flushed
0 buffers still dirty
Closing open logical volumes...
Done
Step 3 - Network configuration
Firmware Version 2.13
Duplex Console IO Dependent Code (IODC) revision 1
Firmware Version 2.13
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor Cache Size
Number State Inst Data
--------- -------- --------------------- ----------------- ------------
0 900 MHz Active Functional 32 MB/32 MB
1 900 MHz Idle Functional 32 MB/32 MB
2 900 MHz Idle Functional 32 MB/32 MB
3 900 MHz Idle Functional 32 MB/32 MB
Central Bus Speed (in MHz) : 200
Available Memory : 2097152 KB
Good Memory Required : Not initialized. Defaults to 32 MB.
Primary boot path: scsiA.6
0/2/1/0.6
Alternate boot path: lan.0.0.0.0
0/3/3/0
Console path: 0/4/0/0.0
Current Console path: serial_A.643
17.643
Keyboard path: usb0
0/3/1/0.0
Keyboard path ignored for serial consoles.
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 2
HARD Booted.
ISL Revision A.00.43 Apr 12, 2000
ISL booting hpux
Boot
: disk(0/2/1/0.6.0.0.0.0.0;0)/stand/vmunix
10653696 + 1933312 + 1534832 start 0x1fc568
alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000.
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: nfs3_link(): File system was registered at index 3.
NOTICE: autofs_link(): File system was registered at index 6.
NOTICE: cachefs_link(): File system was registered at index 7.
iether0: INITIALIZING HP PCI 1000Base-T Built-in at hardware path 0/3/3/0
System Console is on the Built-In Serial Interface
Entering cifs_init...
Initialization finished successfully... slot is 9
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Starting the STREAMS daemons-phase 1
Checking root file system.
file system is clean - log replay is not required
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 2095104 Kbytes, lockable: 1564608 Kbytes, available: 1804120 Kbytes
/sbin/ioinitrc:
insf: Installing special files for ipmi instance 0 address 16
/sbin/krs_sysinit:
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" has been successfully changed.
Resynchronized volume group /dev/vg00
vxfs fsck: sanity check: root file system OK (mounted read/write)
Checking hfs file systems
/sbin/fsclean: /dev/vg00/lvol1 (mounted) ok
HFS file systems are OK, not running fsck
Checking vxfs file systems
/dev/vg00/lvol8 :
vxfs fsck: sanity check: /dev/vg00/lvol8 OK
/dev/vg00/lvol3 :
vxfs fsck: sanity check: root file system OK (mounted read/write)
/dev/vg00/lvol4 :
vxfs fsck: sanity check: /dev/vg00/lvol4 OK
/dev/vg00/lvol5 :
vxfs fsck: sanity check: /dev/vg00/lvol5 OK
/dev/vg00/lvol6 :
vxfs fsck: sanity check: /dev/vg00/lvol6 OK
/dev/vg00/lvol7 :
vxfs fsck: sanity check: /dev/vg00/lvol7 OK
Cleaning /etc/ptmp...
(c)Copyright 1983-2000 Hewlett-Packard Co., All Rights Reserved.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-1992 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993 The Open Software Foundation, Inc.
(c)Copyright 1986 Digital Equipment Corp.
(c)Copyright 1990 Motorola, Inc.
_______________________________________________________________________________
Welcome to HP-UX!
Before using your system, you will need to answer a few questions.
The first question is whether you plan to use this system on a network.
Answer "yes" if you have connected the system to a network and are ready
to link with a network.
Answer "no" if you:
* Plan to set up this system as a standalone (no networking).
* Want to use the system now as a standalone and connect to a
network later.
_______________________________________________________________________________
Are you ready to link this system to a network?
Press [y] for yes or [n] for no, then press [Enter]
Reference
- Ignite-UX Administration Guide: for HP-UX 11i > Chapter 8 Booting and Installing HP-UX on Clients Using the Server > Configuring the Installation http://docs.hp.com/en/5992-3336/ch08s04.html
